Minimising Wear And Preventing Damage - Stihl RM 3 RT Manual De Instrucciones

12.7 Storage (winter break)
Note the following points when storing the
machine for long periods (winter break):
● Clean all external parts of the machine
with care.
● Thoroughly lubricate/grease all moving
parts.
● Empty the fuel tank and carburettor
(e.g. by running empty).
● Unscrew the spark plug (see engine
instruction manual) and pour approx.
3 cm³ of engine oil into the engine via
the spark plug hole. Turn the engine
several times with the spark plug
removed (pull the recoil starter rope).
Fire hazard!
Keep the spark plug socket away
from the spark plug hole due to the
danger of ignition.
● Screw the spark plug back in (see
engine instruction manual).
● Perform an oil change (see engine
instruction manual).
● Store the machine in a dry and locked
place that is generally free of dust.
Make sure that it is out of the reach of
children.
0478 111 9938 A - EN
13. Transport
13.1 Transporting
Risk of injury!
Observe the section "For your
safety" before transporting. (
Carry the machine only with the
help of a second person. Always
wear suitable safety clothing
(safety shoes, thick gloves).
Detach the spark plug socket
before lifting or transporting.
Carrying or lifting the machine:
● A Handlebar installed:
Lift the machine at wheel fork (1) and
carry it at upper handlebar (2).
● B Handlebar folded down (transport
position):
Lift the machine at wheel fork (2) and
carry it at lower handlebar (3).
● When lifting or carrying the machine,
also keep your hands and feet a safe
distance from the mowing blade.
Securing the machine during transport:
● Transport the machine on a clean, flat
load floor on all 3 wheels only and
secure against slipping using suitable
fastening materials.
● Fasten ropes or straps to lower
handlebar (3) and to wheel fork (4).
14. Minimising wear and
preventing damage
Important information on maintenance
and care of the product group
petrol lawn mowers (STIHL RM)
18
STIHL assumes no liability for material or
personal damage caused by the non-
observance of information contained in the
4.4)
operating instructions, in particular with
regard to safety, operation and
maintenance, or which arise through the
use of unauthorised attachment or spare
parts.
Please always observe the following
important information for the prevention of
damage or excessive wear to your STIHL
machine:
1. Wearing parts
Some parts of the STIHL machine are
subject to normal wear even when used
properly and must be replaced in due time
depending on type and duration of use.
These include:
– Blades
– V-belt
2. Compliance with the information in
this instruction manual
The STIHL machine must be used,
maintained and stored with the care
described in this instruction manual. Any
damage caused by non-compliance with
the safety, operating and maintenance
instructions is the sole responsibility of the
user.
This applies in particular to:
– Product modifications not approved by
STIHL.
43