Notes For Personnel; Technical Description; Type Plate; Safety Instructions For Assembly - zarges Z600 Instrucciones De Montaje

2.4 Notes for Persons under the influence of drugs, alcohol or medication reducing reaction
personnel times must not be allowed to handle or work on or with the product.
2.5 Working with > Keep clear of live parts when working with electrical equipment on the product.
electrical
> When calculating safety clearances, allow for the swinging radius of power lines
equipment
3.

Technical description

3.1 Product These instructions are valid for the following products:
description
• ZAP telescopic platform ladder (order nos. 41325, 41326, 41327 and 41328)
The product number can be found on the sticker on the ladder frame.
Safety identification
The ZAP telescopic platform ladder conforms to standard EN 131.
Type approval
3.2 Scope of The scope of delivery depends on the individual order.
delivery
> Before starting assembly of the product, check that all components listed in the

3.3 Type plate

For identification of the specific model supplied, see the type plate. The type plate is
attached to the outside of the side platform profile section.
> Replace the type plate if it becomes illegible.
and the movement radius of working personnel. The movement radius includes
any objects held by personnel.
The ZAP telescopic platform ladder ladders have been tested by
TÜV Süd (German Technical Control Board South).
Produktion überwacht
Sicherheit geprüft
order confirmation and on the delivery note have been supplied and are in perfect
condition. For assembly, use only original parts that are free from defects.
15