Quick Start-Up Guide For Acs850 With Standard Control Program; About This Guide; Safety Instructions - ABB ACS850 Guia De Inicio Rapido

Quick Start-up Guide for ACS850 with Standard Control Program 3

Quick Start-up Guide for ACS850 with Standard
Control Program

About this guide

This guide contains the basic procedure that needs to be followed to start up an
ACS850 drive (with Standard Control Program). During the procedure, the drive is set
up using the ACS850 Control Panel.
Note: Only the functions of the Control Panel needed during the procedure are
described in the guide. The complete instructions for using the Control Panel are
included in the ACS850 Standard Control Program Firmware Manual
(3AUA0000045497 [English]).

Safety instructions

WARNING! All electrical installation and maintenance work on the drive
should be carried out by qualified electricians only.
Never work on the drive, the braking chopper circuit, the motor cable or the motor
when input power is applied to the drive. Always ensure by measuring that no voltage
is actually present.