Superwinch S2500 Manual Del Propietário página 8

M O U N T I N G
Y O U R W I N C H
Superwinch mounting (fitting) kits
are available for most popular vehi-
cles. If you can't locate a kit locally
contact Superwinch at the address
listed on the front of this manual
for the name of a Superwinch dealer
near you.
Detailed mounting instructions are
provided with each mounting kit.
Read and follow directions carefully
to ensure proper winch alignment
and trouble free operation.
the wire rope in the underwind
direction. Improper mounting could
damage your winch and void your
warranty.
NOTES
1. All dimensions are in inches [millimeters].
2. Winch is mounted with M10 x 1.5 hardware. Typical mount is to flat surface capable of handling
the loads. Bolts to be ISO Grade 8.8 or better.
8
This winch MUST
be mounted with
I N S T A L L A T I O N
MINIMUM ELECTRICAL
REQUIREMENTS
For 12 volt winches, a 60 ampere
alternator and battery with 440
cold-cranking amperes capacity are
the minimum recommended power
sources. If the winch is in heavy use,
an auxiliary battery and heavy duty
alternator with battery isolator are
recommended.
Step (1)
Install mounting kit or structural
support for winch.
Step (2)
Mount the winch to the mount that
you have designed.
The M10 x 1.5 x 40mm mounting
bolts supplied are the correct length
for use with up to a 1/4" (6.3mm)
thick plate.