Cd/Usb Programmed Playback; Clearing The Program - Teac TC-X350i Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Up to 20 tracks/files can be programmed in the desired order.
1
Press the Source button to select "CD" or "USB".
If playback has been started, press the Stop (8) button to stop
playback.
2
Press the PROGRAM button.
"PROG" blinks on the display.
Example: Audio CD
Track number
Example: MP3/WMA file
Folder number
File number
o To cancel the program mode, press the Stop (8) button.
o When no button is pressed for 15 seconds, the program mode
will be cancelled.
3
(When programming MP3/WMA files)
Press the FOLDER (k/ j ) buttons to select a folder on the
MP3/WMA disc or USB storage device.
o MP3/WMA files that are not placed in folders are put in the "01"
(root) folder.

CD/USB Programmed Playback

Program number
Program number
4
Press the Skip (.//) buttons to select a track/file,
then press the PROGRAM button.
The track/file is programmed, and the program number ("P-01")
is displayed.
o Repeat steps
and
to program more tracks/files.
3
4
5
When you have finished selecting track/file numbers,
press the Play/Pause ( 7 / 9 ) button to start program
playback.
o After playback of all the programmed tracks/files has finished
or you stop the programmed playback, press the Play/Pause
(7/9) button to play the program again.
o You can use Skip (.//) button during program playback
to select and play other tracks/files in the program.
o During programmed playback, the Number buttons do not
work.

Clearing the program

In the stop mode, press the Stop (8 ) button.
"PROG" disappears from the display.
o In the following cases, the programmed contents will also be
cleared:
Changing the source
Pressing the STANDBY/ON button
Ejecting the disc or disconnecting the USB storage device
Disconnecting the AC power cord
23

Publicidad

Tabla de contenido
loading

Tabla de contenido