Eaton Greengate GDS Instrucciones De Instalación

Installation Instructions
Greengate Digital Switch
Interrupteur numérique Greengate
Interruptor digital Greengate
General Information
The Greengate Digital Switch station from Eaton's Cooper
Controls Business provides a sleek appearance combined
with complete control and flexibility. The adaptable design
allows you to easily choose from a range of button
configurations.
GDS Supplied Parts
Front Cover
GDS Dimensions
The Greengate Digital Switch is intended to fit into a
single gang wall box with a minimum internal depth of
2 inches (51 mm).
3.25 in
(83 mm)
Zone 1
Zone 2
Zone 3
4.75 in
(121 mm)
Zone 4
Zone 5
Zone 6
Mounts to standard NEMA style wall box, standard digital switch insert size
● ●
Model# GDS
Main Body
Inner Plate
0.25 in 1.38 in
(6.4 mm) (35 mm)
3.26 in
(83 mm)
0.65 in
(17 mm)
GDS Installation
1. On the underside of the front cover, beneath the
lower buttons, locate the small central recess.
Carefully insert a small implement (such as a pen or
screw driver) into the recess and lever the front cover
gently away from the inner plate.
2. Unclip the front cover from the top of the inner plate.
3. Remove the two retaining screws located above and
below the buttons and lift the inner plate away from
the main body.
INS #