Eaton Greengate GDS Instrucciones De Instalación página 3

4. With the new buttons in place within the frame, align
its clips with the four holes of the main body and press
it into place so that all four clips click as they lock.
5. Place the inner plate onto the main body (noting the
orientation arrow). With the plate in place, insert and
lightly tighten the two retaining screws.
Reassembling the GDS
1. Place the inner plate onto the main body (noting the
orientation arrow). With the plate in place, insert and
lightly tighten the two retaining screws.
2. Attach the top edge of the front cover to the main body.
3. Angle the front cover down and press the lower part of
it against the inner plate until it clicks into place.
Ambient Atmosphere Requirements
Temperature: 32° F to 104° F (0° C to +40° C)
Humidity: 0 to 95% non-condensing
Greengate Digital Switch
Reassembling the GDS
3