If needed, place a towel over the garment then press. This will protect stitching,
rhinestones, etc.
CAUTION: When ironing embroidered, stitched items or garments with rhinestones,
sample an area to see if the steam or heat will affect the area and proceed with
caution.
STORING AND MAINTENANCE
CAUTION: Prior to storing or providing maintenance to your steam press, isolate
the unit by removing the cord from the power socket and avoid immersing the unit
in water.
1. Water may be left in water tank reservoir; however, it is recommended that if
the machine will be stored for a long period of time, any left over water in the
unit should be drained.
2. Wait approximately 30 minutes for the press to cool down before storing.
Once cooled, lower the pressing plate onto the ironing board; pull down the
pressing handle completely, then push the locking knobs in, downwards to the
"locked" position.
3. Wipe the steamer with a soft cloth when/if necessary.
4. Store in a cool, dry place.
5. Replace the water filter when necessary. Additional filters can be ordered at
www.reliablecorporation.com
CLEANING
1.
Fill the water tank using water container provided.
2. Place the pressing cushion in the center of the ironing board.
3. Place a clean towel over the pressing cushion and the ironing board.
4. Set the fabric temperature selection control to the highest setting (Linen).
When the steam light illuminates, gently lower the pressing plate onto the
pressing cushion.
5. Press the steam burst button 6 to 7 times. Be careful to avoid touching the
hot metal surfaces and avoid leaving hands under the ironing press when
using the steam burst button.
6. Once the pressing plate has cooled down you can clean the surface with a
damp cloth. DO NOT use any abrasives on the pressing plate. This pressing
plate has a non-stick coating that will assist in cleaning.
7. The ironing board cover is removable and can be rinsed with mild detergent
and warm water. You may purchase replacement covers on our website at:
www.reliablecorporation.com.
11