Product Specs; Troubleshooting - Reliable ARIA 350SP Manual De Instrucciones

PRODUCT SPECS

ARIA 350SP
Voltage supply: 120, 60 Hz
Output: 1800 W
Water capacity: 23.70 fl oz
Cord: 8 ft.
Weight: 14kg

TROUBLESHOOTING

CAUTION: Prior to maintaining your steam press, isolate the unit by removing the
cord from the power socket.
PROBLEM
LED is not on
No heat
No steam
Buttons are not working
properly
The machine cannot be
opened by the handle of the
pressing plate
Steam burst output is weak
SOLUTION
• Ensure that the press power cord is correctly plugged into
a 120V AC power outlet only.
• Ensure circuit breaker is operational.
• Try operating the press from another power outlet.
• Make sure the temperature has been selected.
• Pressing plate has been left in a raised position for more
than 20 minutes and automatic shut-off has engaged.
• Water may be low, refill water tank.
• Temperature setting is too low to activate steam. Select
a higher temperature and wait for the ready light to
illuminate before steaming.
• Unplug the unit from the power outlet for 5 minutes then
plug back in.
• Pull the locking knobs upwards
• Pressing plate needs to be cleaned. Refer to cleaning
section of the manual for the correct procedure.
12