Assembly And Use - Reliable ARIA 350SP Manual De Instrucciones

ASSEMBLY AND USE

1. Set press on a flat, level surface.
2. Lift both locking knobs (P) upwards to the "unlock" position.
3. Gently apply downward pressure to the handle, then release. The press will
automatically face upwards and remain in a lifted position.
4. Before plugging in the press, fill the detachable water tank (L) using the water
container (O) provided. When finished, slide the tank back into place. Water is
only necessary when using the steam burst button (A).
NOTE: When filling the water tank, distilled water is preferred, but not
required.
PUSH DOWNWARDS
3
MAX---
600ml-
500ml-
400ml-
300ml-
MIN---
PULL UPWARDS
2
MAX: 700ml
MIN: 200ml
06