Dimmer Curves; Network Settings - Cameo EVOS S3 Manual De Usuario

Test =
Auto Lock Unit =
Reset =
Factory Reset =
Service Menu =

Dimmer curves

linear
DMX value

NETWORK SETTINGS

Press MENU to access the selection menu for the selection menu. Using the UP and DOWN controls, select the menu item "Network Set-
tings" (observe arrow) and confirm with ENTER.
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
Network Settings

System Info
This will take you to the sub-menu for setting the following sub-menu items (selection with UP  and DOWN , confirm with ENTER,
change value with UP  and DOWN , confirm with ENTER):
14
Function test On
Off
Automatic locking On
of the controls
Off
Reset motors Head
Pan&Tilt
All
Reset to factory Reset Now?
settings
Only for service
purposes
exponential logarithmic
DMX value
DMX value
step-by-step function test of the LED and all motors (Pan, Tilt,
Gobo...)
Stop function test
Automatic locking of the controls after approximately 1 minute of
inactivity. Display shown upon attempted use: "Keys Locked!"
To unlock: Press and hold  and  simultaneously for approx.
5 seconds
Automatic locking of the controls is disabled
Resets all head motors (colour wheel, gobo wheel, prism...)
Resets the pan & tilt motors
Reset all motors
Resetting to factory settings:
Perform reset with ENTER, cancel with MENU
S-curve
DMX value