Breg Polar Care Wave Instrucciones De Uso página 15

OPERATING INSTRUCTIONS
Connecting and Disconnecting Cold-Compression Pad to Unit:
Line up the Breg logos on the

tubing and pad connectors.
Squeeze down gently on the

blue clips.
Push connectors together until

they make a "click" sound.
Disconnect the cold-compression pad from the unit by pressing the blue clips and gently pulling
the connectors apart.

The Breg Polar Care cold-compression pad may be disconnected from the unit while it's running
and connectors will seal, preventing water from flowing out of tubing. Note: Some dripping during
release is normal.
Knee Pad Shown
13