Removing The Mowing Head; Mounting The Loop Handle - Stihl FSE 52 Manual De Instrucciones

English
1
2
3
► Thread the ends of the nylon lines (4) from the spool (2)
through the openings (1) in the mowing head (5).
► Insert the spool (2) in the mowing head (5).
► Fit the cover (7) on the mowing head (5) so that its tabs
(3) line up with the openings (6) in the mowing head (4).
► Push the cover (7) onto the mowing head (5) as far as
stop.
The tabs (3) engage audibly.
6.2.2

Removing the Mowing Head

Trimmer with fanwheel
► Switch off the trimmer and disconnect extension cable's
coupling from trimmer's plug.
► Hold fanwheel (2) steady with one hand.
► Unscrew the mowing head (1) counterclockwise.
► Remove the fanwheel.
34
4
5
6
7
1
2
Trimmer without fanwheel
The trimmer comes with the AutoCut 2-2 mowing head
already mounted and cannot be removed by the user.. The
spool can be removed by the user.
► Switch off the trimmer and disconnect extension cable's
coupling from trimmer's plug.
1 1
► Press in the tabs (1) and remove the cover (3).
► Remove the spool (2).
6.3

Mounting the Loop Handle

► Switch off the trimmer and disconnect extension cable's
coupling from trimmer's plug.
2
1
► Line up the loop handle (2) so that the recess for the star
knob nut (1) is on the right of the control handle and the
openings in the loop handle (2) are facing the operator.
6 Assembling the Trimmer
2
3
3
0458-777-9821-B