Power Off - ECOVACS ROBOTICS DEEBOT N78 Manual De Instrucciones

3. Operating and Programming
5 Start
Press the AUTO Mode Button on DEEBOT or on the Remote Control. DEEBOT starts to work
immediately in AUTO Cleaning Mode.
To choose another Cleaning Mode, please refer to section 3.3 Cleaning Mode Selection for details.
*
6 Pause
Pause DEEBOT by pressing the AUTO Mode
Button on DEEBOT or the START/PAUSE
Button on the Remote Control.
DEEBOT can be directed to move forward,
*
backward, left and right using the Direction
Control Buttons on the Remote Control
when it is Paused. DEEBOT does not
clean when Paused.
The AUTO Mode Button on the robot's
*
Control Panel stops glowing after the robot
is paused for more than 1 minute. Press
AUTO Mode Button on the robot or press
any button on the Remote Control to wake
up the robot.
7

Power OFF

Pause DEEBOT. Move the Bottom Power
Switch to the OFF position.
When DEEBOT is not cleaning, it is
*
suggested to keep it powered ON and
charging.
10
EN