BH FITNESS H832U Instrucciones De Montaje página 11

This screws onto the right-hand crank,
also marked with an (R), in a
clockwise direction.
Tighten securely Fig.10.
The left pedal (18) is marked with the
letter (L).This screws onto the left-
hand crank, also marked with an (L),
in an anti-clockwise direction. Tighten
securely Fig.10.
8.- ADJUSTING SADDLE HEIGHT.-
Loosen the saddle height control knob
(83) a little, turning it anti-clockwise
and then pulling it back, when the
saddle is at the right height release
the control knob and this will lock back
into the holes on the saddle post.
Tighten the control knob by turning it
clockwise.
9.- LEVELLING.-
Once the unit has been placed into its
final position for doing exercise, make
sure that it sits flat on the floor and
that it is level. This can be achieved by
screwing the adjustable support
blocks (23) up or down.
10.- MOVEMENT & STORAGE.-
The appliance is equipped with wheels
(48) making it easier to move about.
The two wheels at the front of the
appliance make it easy to store the
machine away, as shown in Fig.12.
MAINS CONNECTION.-
Insert the jack on the transformer into
the connection hole on the main body
and then plug the transformer into a
220 V mains supply, Fig.11.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
11