Trouble Shooting - Saivod SAP914 Manual De Usuario

· Turn off machine and pull out plug .
· Clean and dry filters , then reinstall them .
· Pull out exhaust pipe for safekeeping .
· Put the machine into plastic bag , and place it on a dry place.
Please contact professional serviceman without delay in following situation
T o r u b e l
Machine cannot
work
Machine
auto-restarts
frequently
Too noisy
Compressor
cannot work
Note: when abnormal situations are occurred, turn off machine and pull out plug,
then contact with professional electrician for help.

Trouble Shooting

C a u e s
Power off
water-full indicator turns on
Direct sunlight
Door and windows are open ,
many heat sources in the room .
Filters are too dirty.
Air-inlet or air out-let is blocked
Machine is not put on flat ground.
Compressor
protection turns on
Power on
Drain water out
Draw the curtains
Close the door and windows, move out
heat sources.
Clean or replace filters
Remove blockage
Place it on flat and solid ground, avoiding
shaking
time-delay Wait for 3 minutes, then restart the
machine after temperature reduces .
13
S l o t u o i n