Stop - ECOVACS WINBOT 7 Manual De Instrucciones

WINBOT 7 can be directed to move forward,
backward, left and right using the Direction
Control Buttons on the Remote Control when
Paused. WINBOT 7 will clean when Direction
Control Buttons are used.

3.9 Stop

When WINBOT 7 completes its cleaning cycle, it returns to the place it started and beeps.
1 Remove WINBOT 7
Grasp WINBOT 7's handle. Move the Power
Switch to "OFF" position.
2 Remove the Safety Pod, if used
* If WINBOT 7 has a problem and the Indicator Light glows RED, it can be reset by pressing the
Reset Button on the Remote Control.
3. Operating the Robot
Pull the Air Release Trigger and remove
WINBOT 7 from the window. Polish away
any marks left on the glass from WINBOT 7's
removal with the provided Finishing Cloth.
Unplug WINBOT 7
3
11 11
EN