Setting The Temperature; Switching Off The Cooler - Waeco CoolFreeze CDF16 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
CoolFreeze CDF16
A
NOTICE! Danger from excessively low temperature!
Ensure that the only those objects are placed in the cooler that are
intended to be cooled at the selected temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
6.6

Setting the temperature

➤ Press the "SET" button once.
➤ Use the "UP +" and "DOWN -" buttons to select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The
display flashes several times and then the current temperature is dis-
played again.
6.7
Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit.
This is how to do it:
➤ Switch on the cooler.
➤ Press the "SET" button twice
➤ Use the "UP+"and "DOWN-"buttons to select Celsius or Fahrenheit.
✓ The selected temperature units then appear in the display for a few sec-
onds. The display flashes several times before it returns to the current
temperature.
6.8

Switching off the cooler

➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the cover slightly open. This prevents odour build-up.
EN
Operation
27

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido