Operating The Device Safely - Waeco CoolFreeze CF11 Instrucciones De Uso

CoolFreeze
CAUTION!
!
 Disconnect the device from the power supply
– before each cleaning and maintenance
– after every use
 Food may only be stored in its original packaging or in suitable
containers.
NOTICE!
A
 Check that the voltage specification on the type plate
corresponds to that of the energy supply.
 Only connect the device to a DC plug socket in the vehicle (e. g.
cigarette lighter) with the DC cable.
 Only connect the device as follows:
– With the DC cable to a DC plug socket in the vehicle (e. g.
cigarette lighter)
– Or with the 230 V connection cable to the 230 V AC mains
supply
 Connect the device with the 230 V connection cable to the
230 V AC mains supply.
 Never pull the plug out of the socket by the cable.
 If the cooler is connected to the DC socket: Disconnect the
cooler and other power consuming devices from the battery
before connecting the quick charging device.
 If the cooler is connected to the DC socket: Disconnect the
cooler or switch it off when you turn off the engine. Otherwise
you may discharge the battery.
 The cooling device is not suitable for transporting caustic
materials or materials containing solvents.
 The cooling device contains inflammable cyclopentane in the in-
sulation. The gases in the insulation material require special dis-
posal procedures. Deliver the device at the end of its life-cycle
to an appropriate recycling.
2.2

Operating the device safely

CAUTION!
!
 Before starting the device, ensure that the power supply line
and the plug are dry.
EN
Safety instructions
23