Energy Saving Tips; Connecting The Cooler - Waeco CoolFreeze CFX35 Instrucciones De Uso

CFX35 – CFX65DZ
✓ The selected temperature units then appear in the display for a
few seconds. The display flashes several times before it returns
to the current temperature.
6.2

Energy saving tips

 Choose a well ventilated installation location which is protected
against direct sunlight.
 Allow warm food to cool down first before placing it in the device
to keep cool.
 Do not open the cooling device more often than necessary.
 Do not leave the cooler unit open for longer than necessary.
 Defrost the cooler once a layer of ice forms.
 Avoid unnecessary low temperatures.
6.3

Connecting the cooler

Connecting to a battery (Vehicle or boat)
The cooler can be operated with 12 V or 24 V
A
NOTICE! Danger of damage!
Disconnect the cooler and other consumer units from the battery
before you connect the battery to a quick charging device.
Overvoltage can damage the electronics of the device.
For safety reasons the cooler is equipped with an electronic system
to prevent the polarity reversal. This protects the cooler against
short-circuiting when connecting to a battery.
➤ Plug the 12/24 V connection cable (fig. 1 2, page 3) into the
device DC voltage socket and also into a 12 V or 24 V cigarette
lighter socket.
EN
Operation
.
g
35