Safety Devices On The Product - Jonsered FR 2312 MA Manual De Usuario

Ocultar thumbs Ver también para FR 2312 MA:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

cannot fully prevent injury but it decreases the
degree of injury if an accident does occur. Let your
dealer help you select the right equipment.
Always wear approved hearing protection. Long term
exposure to noise can result in permanent hearing
impairment.
Always wear protective shoes or protective boots.
Steel toes are recommended. Do not use the
product barefoot.
Wear gloves when necessary, for example when you
attach, examine or clean the cutting equipment.
Do not wear loose-fitting clothing, jewelry or other
items that can get caught in moving parts.
Keep first aid equipment and fire extinguisher close
at hand.

Safety devices on the product

WARNING: Read the warning instructions
that follow before you use the product.
Do not use a product with defective safety devices.
Do a check of the safety devices regularly. If the
safety devices are defective, speak to your Jonsered
service agent.
Do not make modifications on safety devices. Do not
use the product if protective plates, protective
covers, safety switches or other protective devices
are not attached or are defective.
To do a check of the ignition lock
Start and stop the engine to do a check of the
To start the engine on page 13
ignition lock. See
To stop the engine on page 16 .
and
Make sure that the engine starts when you turn the
ignition key to START.
Make sure that the engine stops immediately when
you turn the ignition key to STOP.
Safety circuit
The engine can only be started when the conditions are
met as follows:
The cutting deck is lifted and the parking brake is
applied.
The engine must stop in the situations that follow:
8
The cutting deck is lowered and the operator lifts
from the seat.
The cutting deck is lifted, the parking brake is not
applied and the operator lifts from the seat.
To do a check of the safety circuit, try to start the engine
with one of the conditions above not met. Change the
conditions and try again. Do this check daily.
To do a check of the speed limiter, FR 2312 MA
Release the forward pedal (1). The speed
decreases.
For more brake power, press the reverse pedal (2).
Make sure that the forward and reverse pedals are
not blocked and can be operated freely.
Make sure that the speed decreases when the
forward pedal is released.
To do a check of the brake pedal, FR 2312 M
For FR 2312 M the parking brake pedal is also the
service brake.
Make sure that the speed decreases when you press
the brake pedal.
Make sure that the brake pedal is not blocked and
can be operated freely.
Muffler
The muffler keeps the noise levels to a minimum and
sends the exhaust fumes away from the operator.
Do not use the product if the muffler is missing or
defective. A defective muffler increases the noise level
and the risk of fire.
Examine the muffler regularly to make sure that it is
attached correctly and not damaged.
CAUTION: The muffler becomes very hot
during and after use and when the engine
operates at idle speed. Be careful near
1
2
828 - 001 -

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fr 2312 m

Tabla de contenido