Technical Characteristics - Virutex CE96H Manual De Instrucciones

E N G L I S H
CE96H CURVED PLANER
(See figures in pages 28, 29, 30)
Important
Read these OPERATING INSTRUCTIONS
and the attached GENERAL SAFETY
INSTRUCTIONS LEAFLET carefully
before using the machine. Make sure
you have understood them before ope-
rating the machine for the first time.
Keep both sets of instructions for any
future queries.
1. SAFETY INSTRUCTIONS FOR
USE OF THE PLANER
Read carefylly the GENERAL SAFETY
INSTRUCTIONS LEAFLET, which is inclu-
ded in the machine documentation.
1. Before starting up the machine make sure that
the supply voltage is the same as that shown on the
specification plate.
2. Keep hands away from the cutting area at all times
and always hold the machine down with both hands
using the handles.
3. Always use original VIRUTEX blades. Never use
incorrect, defective or faulty blades.
4. It is necessary to work with dust collection in
order to prolong the life of the blades and prevent
any breakages.
5. Avoid cutting nails. Check the work surface before
planing.
6. Wait until the machine has come to a complete
stop before putting it down or storing it.
7. Wear earplugs when using the machine (see
chapter 11)

2. TECHNICAL CHARACTERISTICS

Imput Power.....................................................700 W
Motor.............................................................50/60 Hz
No load speed.......................................16,500 min
Cuts per minute.................................................33,000
Cutting width.....................................................80 mm
Minimum concave radius.................................450 mm
Minimum convex radius...................................400 mm
6
Cutting depth....................................................0-3 mm
Weight...............................................................3.2 Kg
Weighted equivalent continuous
acoustic pressure level A............................................87 dBA
Acoustic power level A................................................98 dBA
Uncertainty...............................................................K = 3 dbA
Wear ear protection!
Vibration total values.......................................a
Uncertainty...........................................................K: 1.5 m/s
3. EQUIPMENT
Standard equipment
Inside the box you will find the following components:
1. Planer CE96H - set with reversible MD blades
2. Lateral fence guide
3. Dust collector connection
4. Spanner for fixing blades
Optional tools
3599101 - Reversible blade support
3531019 - Set of reversible AR blades
3540118 - Set of reversible MD blades
2031086 - Set of 3-mm concave AR blades, with
supports
2031087 - Set of 3-mm concave AR blades
4. GENERAL DESCRIPTION
The CE96H planer is equipped with a front shoe and
a rear base with adjustable radiuses which allow
them to be adapted to convex or concave surfaces
for planing. The front shoe also permits the cutting
depth to be adjusted up to 3 mm. The planer is also
equipped with a lateral fence; double use, hard metal,
replaceable blades; a safety switch, and a dust col-
lector connection.
5. LATERAL FENCE
Place the lateral fence L in position and secure with
knob P (Fig. 1).
It is advisable to work with the lateral fence mounted
whenever possible to ensure perpendicularity be-
tween the face of the piece and the blade cut.
6. ADJUSTMENTS
PLANING CONCAVE SURFACES
-1
Approximation planing:
Draw a line of reference R, for approximation plan-
ing (Fig. 2).
Set the cut depth to "0" using knob C (Fig. 2).
: <2.5 m/s
2
h
2