Setting Up The Weighing Platform; Selecting The Site Of Installation; Ambient Conditions - Mettler Toledo PBA220 Instrucciones De Manejo

2
2.1
04/13 Order number 72196694E

Setting up the Weighing Platform

Selecting the Site of Installation

The surface must be able to bear the weighing platform
➜
under maximum load at the points of support. At the
same time it should be so stable that no vibrations
arise during weighing. This is also to be observed
when installing the weighing platform in conveyor and
similar systems.
If possible, platform installation should be located in
➜
an area free from vibration.

Ambient Conditions

Do not use the weighing platform in regularly wet and
➜
corrosive environments.
Never immerse platform into liquids.
Observe the following ambient conditions:
➜
– No direct sunshine
– Avoid strong air currents
– Avoid excessive temperature fluctuations
– Temperature range –10 °C to +40 °C
7
User Manual PBA220
METTLER TOLEDO