Alarm Setting - TFA Dostmann 60.5013 Instrucciones De Uso

TFA_No. 60.5013_Anleit_04_20
Radio-controlled projection alarm clock with thermometer
7.2 Day-of-week/calendar week
• Press and hold the DOWN button to choose the language for the weekday.
• Language abbreviations change from one language to another: English (EN),
German (GE), French (FR), Italian (IT) and Spanish (SP).
• Press the DOWN button to choose weekday or week number display.
7.3 Temperature display
• Press the °C / °F / WAVE button to change between °C (Celsius) or °F (Fah-
renheit) as temperature unit.
7.4 Setting of time zone
• The time zone is used for countries where the DCF signal can be received but
the time zone is different from the DCF time (e.g. +1=one hour later).
• Press and hold the UP button for 2 seconds in normal mode (time/tempera-
ture display).
• "F" appears on the display.
• Press and hold the MODE button for 2 seconds.
• The hour digit is flashing. Press the UP or DOWN button to adjust hours to
your local time.
• Confirm with the MODE button.
• Press and hold the UP button for 2 seconds to return to normal mode.

7.5 Alarm setting

• Select your desired alarm by the MODE button:
– AL 1
– AL 2
• Set the alarm time in the desired alarm mode.
• Press and hold the MODE button and the hour digits are flashing.
• Press the UP or DOWN button to adjust the hours.
• Confirm with the MODE button. Set minutes in the same way.
• Confirm with the MODE button and the alarm is activated.
• appears on the display.
• If necessary adjust the second alarm time in the same way.
20
02.04.2020 14:55 Uhr Seite 11
Radio-controlled projection alarm clock with thermometer
• To activate or deactivate the alarm function press the ALARM button.
+ or no alarm symbol is shown on the LCD.
• Once the alarm starts to ring, you can stop the alarm by pressing the ALARM
button.
• You can activate the snooze function by pressing the SNOOZE/LIGHT button on
the top.
• Zz appears and the alarm will be interrupted for 4 minutes.
7.6 Dual time setting
• Press the MODE button three times in the normal mode.
• DUAL TIME and 0:00 appear on the display.
• Hold the MODE button for 2 seconds. The hour digits are flashing.
• Press the UP or DOWN button to adjust the hours.
• Confirm with the MODE button and set minutes in the same way.
• Confirm with the MODE button.
7.7 Projection and light
A. For permanent projection connect the power adapter and slide the CONTINUE
PROJECTION switch upwards.
• Press the TEMP/FLIP button to turn the image by 180°.
• Turn the dial and set the focus.
• Hold the TEMP/FLIP button for three seconds and the projection toggles
between time and temperature every 5 seconds.
• Hold the TEMP/FLIP button for three seconds to deactivate the toggle.
B. Without permanent projection (CONTINUE PROJECTION off)
• Press the SNOOZE/LIGHT sensor button.
• The backlight will be activated and the projection will turn on for a few seconds.
Note: To avoid interference, the backlight and the projection turn off during the
reception of the radio controlled clock signal.
, ,
21