Olympia A 230 Plus Instrucciones De Uso página 17

Useful Instructions and Tips
The following instructions and tips help you achieve an optimal lamination result
every time and avoid damaging the laminator.
Always disconnect the power plug when the laminator is not in use.
During laminating, ensure sufficient ventilation in the room.
Do not laminate metal, wet or uneven materials.
Always feed laminating foils into the laminator infeed with the closed side first
and in a straight position.
If necessary, only cut laminating foils after laminating.
Please remember that hot laminated materials are permanently bonded to the
laminating foil and can not be separated from the foil again without possible
damage.
Place the laminator on a level, horizontal serface so that it can output the lami­
nated material without obstruction.
Plug the laminator power cable into an easily accessible power socket.
Do not pull the laminating foil out of the output side during laminating.
Laminator A 230 Plus / A 330 Plus
Useful Instructions and Tips
17