STERWINS 900 JET AUTO-3 Instrucciones De Montaje página 199

Introduction
1
Thank you for choosing this product. Upon designing and manufacturing our products, we place all
of our efforts into ensuring an excellent quality that meets the needs of the users. Following these
instructions allow to optimize the lifetime
IMPORTANT! IN ORDER TO OBTAIN THE UTMOST SATISFACTION FROM THIS PRODUCT UPON
SETTING IT UP, USING IT, AND MAINTAINING IT, WE RECOMMEND THAT YOU CAREFULLY READ
THIS USER MANUAL BEFORE USING THE PRODUCT. PLEASE PAY ATTENTION TO BASIC WARNINGS
RELATING TO SAFETY WITHIN THIS MANUAL, AND KEEP THE MANUAL FOR LATER REFERENCE.
CAREFULLY
Contents
1. Intended use of auto surface pump 900W
2. Safety Instructions
3. Technical data
4. Assembly
5. Transportation
6. Wintering
1. INTENDED USE OF AUTO SURFACE PUMP 900W
The product is mainly intended for home supply and irrigation. Do not use it for others purposes.
Note : This product is not suitable for continuous pump
operation (e.g. continuous circulation in a pond) or as a
stationary installations (e.g. lifting device, fountain pump).
• Only fresh water
After unwrapping the packing, make sure that the product is complete with its accessories (if any). If the
product is damaged or has any defect, please do not use it and bring back it to your dealer.
If you give this product to another people, please give him also this instruction manual.
How it works
The operating principle of the installation is based on create a movement of fluid, suck it and creating
pressure due to centrifugal force generated by the movement of the impeller of the pump. When you
turn on the pump, the liquid in the turbine is pushed from the center of the wheel to the periphery by
centrifugal force, which leads to the creation of a flow, and to the periphery, increased pressure, the result
is that the fluid in the pump begins to flow through the pump outlet
7. Storage
8. Maintenance
9. End of life
10. Warranty
11. CE declaration of conformity
199
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN