CARE AND MAINTENANCE
Regular care or maintenance is essential in ensuring that this product is safe for use. If
any of the following circumstances take place, please stop using the appliance
immediately and contact authorized service representative.
●
Power cord and plug suffer from expansion, deformation, discoloration, damages, etc.
●
A portion of the power cord or the plug gets hotter than usual.
●
Electric pressure cooker heats abnormally, emitting a burnt smell.
●
When power on, there are unusual sounds or vibrations.
If there is dust or dirt on the plug or socket, please remove dust or dirt with a dry brush.
Cleaning
Caution: please make sure the appliance has cooled down and is unplugged before
cleaning.
1. Clean the product after each use. Wipe the black inner housing rim and slot dry with
cloth to prevent rusting on the exterior pot rim.
2. Remove the lid and take out the inner pot, wash them with detergent, rinse with clear
water and then wipe dry with a soft cloth.
3. Use water to clean the lid, including the sealing ring (which can be removed), exhaust
valve, anti-block shield, and wipe them clean with dry soft cloth. Do not take apart the
steam release pipe assembly.
4. Clean the cooker body with clean damp cloth. Do not immerse the cooker into water.
Do not use a wet cloth to clean the pot while the power cord is plugged into the power
outlet.
Electrical Circuit Diagram
120V~60Hz
Temperature fuse
Pressure
switch
Socket
Cooking plate
Connecting line
Power panel
power supply
Power board
Detective switch
Temperature sensor
Display panel
14