Function Keys; Before The First Use; Remove And Install The Anti-Block Shield; Remove And Install The Sealing Ring - Midea MPC176-SS Manual De Uso

CONTROLS AND STATES OF THE COOKER

Function Keys

The most important key is "Keep Warm/Cancel". When the cooker is being programmed or
any program is in effect, press this key will cancel the program and take the cooker to
standby state. When the cooker is in standby state, pressing this key activates the
keep-warm program.
The other function keys include "Rice", "Soup/Stew", "Slow Cook", "Browning/Sauté",
"Chicken", "Meat", "Fish", "Pasta", "Steam", "Parfait", "Chili/Beans", "Start" keys.

BEFORE THE FIRST USE

Before the first use, please take out all accessories from the package and read this manual
carefully. Please pay particular attention to operational instructions and cautions to avoid
any injury or property damage. Please wash the inside of the lid and the inner pot with warm
soapy water, rinse and dry thoroughly. Wipe the outer housing with a clean damp cloth.
Never immerse the cooker housing in water or any other liquid. The inner pot, sealing
ring and exhaust valve and all accessories are dishwasher safe. But never clean the lid and
housing in a dishwasher.

Remove and Install the Anti-Block Shield

The anti-block shield can be
removed by pushing it on the
side to lift it up. To install the
anti-block shield, position it
in place and press it down.

Remove and Install the Sealing Ring

The sealing ring can be removed by
pulling upwards from the sealing ring
rack in sections. To install the sealing
ring, pressing it down into the rack
section by section. The sealing ring can
be installed on either side facing up.
Please note the following:
●
Prior to each use, inspect to make sure the sealing ring is well seated in the sealing ring
rack and the anti-block shield is mounted properly on the steam release pipe.
●
After use, remove any foreign objects from the sealing ring and anti-block shield.
7