Prepare Measurement - Beurer BM 40 Manual De Instrucciones

Icons in the display:
1. Date
2. Time
3. Inflate , release air
4. Systolic pressure
5. Memory display, average value
6. Unit in mmHg
7. Diastolic pressure
8. Battery replacement symbol
9. Pulse symbol
10. Memory space number
11. Cardiac arrhythmia symbol
12. Calculated pulse value / memory space number / memory
display, average value (AL), morning (A), evening (P)
13. User memory
14. Risk indicator
1 2
14
13 12 11
10
9
3
4
5
6
7
8

4. Prepare measurement

Inserting battery
• Remove the battery cover from the
back of the monitor.
• Insert four AA 1.5 V alkaline
batteries. Making absolutely
sure that you insert them with
the correct polarity as marked.
Never use rechargeable bat teries.
• Replace the battery cover carefully.
If 4 warning tones have been sounded and the symbol
appears simultaneously on the display, it is no longer possible
to perform a measurement and all batteries must be replaced.
Once the batteries have been removed from the device, the
date and time must be set again. Any saved measurements are
retained.
The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling points
or electronics retailers. You are legally required to dispose of
the batteries.
The codes below are printed on batteries containing harmful
substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting the user memory, date and time
This menu allows you to set the following functions, one after
another.
19
4 x 1,5V AA (LR6)