Using External Equipments
PROGRAM
FADE MUTING
MD/AUX
MD/AUX
Listening to External
Equipment
You can listen to external equipment such as MD recorder,
turntable or other auxiliary.
First make sure that the external equipment is properly
connected to the System. (See page 7).
1
Set the VOLUME control to the mini-
mum position.
2
Press the MD/AUX button.
"MD/AUX" appears on the display.
3
Start playing the external equipment.
4
Adjust the VOLUME control to the
desired listening level.
5
Apply sound effects, if you wish.
Press the AHB PRO button to reinforce the bass sound.
Press the BASS/TREBLE button on the Remote Control
to control the tone. (See "Tone Control" on page 10.)
To exit MD/AUX mode, you will automatically switch
out of MD/AUX mode when you select another source.
• For operation of the external equipment, refer to its In-
structions.
REMOTE CONTROL
DIMMER
SLEEP
AUTO
DISPLAY
FM MODE
PRESET
RANDOM
REPEAT
DOOR
CD
AHB PRO
SLIDE
BASS
TREBLE
CANCEL
UP
SET
DOWN
CD
FM / AM
VOLUME
PRESET
MD/AUX
FM/AM
TUNING
AHB PRO
CD
DOWN
MULTI CONTROL
MD/AUX
Recording the System's Source
to External Equipment
You can record the System's source to external equipment
which is connected to the MD/AUX-IN/OUT or CD DIGI-
TAL OUT terminals of the System, such as cassette deck or
MD recorder, etc.
First make sure that the external equipment is properly
connected to the System. (See page 7).
Play the System's CD Player or tune in to
a station.
The recording level is not affected by the VOLUME level
set by the System. Also it is not affected by the sound ef-
fects.
• For operation of the external equipment, refer to its In-
structions.
CLOCK
TIMER
VOLUME
UP
16