Care And Maintenance; Accessories - Rothenberger ROCAM 4 Plus Serie Instrucciones De Uso

Battery pack is not charged. Temperature too high/ too low. When the temperature of the battery
pack is between 0 °C and 50 °C, the charging process begins automatically.
● Warning display (4) flashes.
Battery pack is defective. Remove the battery pack immediately from the charger.
The battery pack was not pushed correctly onto the sliding seat (2).
5

Care and Maintenance

Always clean the device after every pipe inspection!
 Turn the device off with the power button on the monitor (7) and remove the battery, and pull
the electrical plug.
 Close the cover and press until it clicks.
 Take off the reel (8) from the ROCAM 4 Plus (see section 4.10) and clean under running wa-
ter.
 Only clean the reel when removed from device.
The device must be protected against water and must only be cleaned with a damp
cloth!
 Insert dried reel (8) back into the device (see section 4.10).
Charger:
Repairs to the charger must only be carried out by qualified electricians.
If the mains connection cable of this tool is damaged, in order to prevent endangering personnel
and property it must be replaced by the manufacturer, or the Customer Service of the manufac-
turer, or a similarly qualified person.
6

Accessories

Accessory Name
Mini-Modul
Camera head 30 mm
Camera head 40 mm
Guide ball for brush tool 30 mm
Guide ball for brush tool 40 mm
Brush tool Ø 100 mm
Brush tool Ø 150 mm
Roll carriage for 40 mm Ø 150 mm
Roll carriage for 40 mm Ø 200 mm
ROCAM 4 Plus - AC - adapter EU
ROCAM 4 Plus - AC - adapter AUS
ROCAM 4 Plus - AC - adapter US/JP
ROCAM 4 Plus - AC - adapter UK
ROCAM 4 Plus - AC - adapter CH
ROCAM transmitter 33 kHz
ROTHENBERGER- Part Number
1500001472
1500000123
1500000122
1500000817
69112
69113
69117
69118
69119
1000002085
1000002087
1000002088
1000002089
1000002090
1500000686
ENGLISH 37