Technical Data Charger And Battery (C); Function Of The Unit; Overview (A); Working Notes - Rothenberger ROCAM 4 Plus Serie Instrucciones De Uso

Ocultar thumbs Ver también para ROCAM 4 Plus Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
Camera head diameter ..................... ø 30 mm, ø 40 mm (optional ø 25 mm Mini Modul)
Slide cable length ............................. 30 m / 65 m (optional 8 m Mini Modul)
Slide cable diameter ......................... ø 7.0 mm / ø 8.0 mm (optional ø 5,5 mm Mini Modul)
Working range................................Ø 40 - 100 mm (optional Mini Modul)
Positioning transmitter ...................... 33 kHz (bolt-on optional)
Protection class camera head .......... IP 68
Included in delivery: ROCAM 4 Plus TV- inspection system with Camera head ø30 mm or ø40
mm, guide ball, positioning transmitter 33 kHz, USB cable, test adaptor, manual, 4 GB SD card,
battery and charger.
3
Technical Data charger and battery
Battery:
U
= Voltage
C
= Capacity
W = Weight
Ic = Charge current
t
= Approx. charging time (90% full)
Charging voltage ............................... 20,75 V DC
Charging temperature ....................... 0° - 50° C
Max. discharging temperature. ......... 5° - 50° C
Recharge battery pack before first use!
4

Function of the Unit

4.1
Overview
1
Camera head
2
Positioning probe
3
Bending spring
4
Reel cable
Rear flap
5
Front flap
6
4.2

Working notes

- Do not bend the reel cable! The cable may break!
- Do not pull the reel cable over sharp edges! The cable may become damaged!
ATTENTION! Always protect ROCAM 4 Plus against water, and use only rec-
ommended indoors. Only the camera head (1) and reel cable (4) may come
into contact with water!
4.3

Changing the battery

 Open the rear cover (5).
 Insert the battery into the compartment on the right side of the accessory compartment until
it clicks. To remove, press the locks and pull the battery out.
Ø 70 - 150 mm (30 mm camera head)
Ø 100 - 300 mm (40 mm camera head)
Charger:
U1 = Input voltage
f1 = Input frequency
P1 = Input power
U2 = Charging voltage
I2 = Max. charge current
Nc = No. of battery cells
W = Weight
Pay attention to the electrical outlet
voltage! Check the label on the bottom
of the charger!
7
8
9
10
11
12
ENGLISH
Monitor unit
Reel
Frame
Holder / Bracket
Guide hook
ROCAM 4 Plus - AC - adapter
(C)
(A)
27

Publicidad

Tabla de contenido
loading

Tabla de contenido