• Pull the crown out to position 2. This will stop the
movement. To set the time accurately to the second,
it is best to stop the movement as the seconds hand
reaches 60.
• Turn the hands forward until the date display changes
to today's date. The hands will now be positioned
between 12 midnight and 1 am.
• Now turn the hands forward to the correct time. If you
are setting the watch in the afternoon, you must turn
the hands past 12 noon again.
• Push the crown back to position 0 to start the watch
movement.
• Now push the crown to position X and secure it by
simultaneously turning it to the right.
Important: Although the watch is water-resistant in
positions 0, 1 and 2, the crown should always be
screwed in again for normal use (position X).
22 | 23