Bestron ALX260CARB Manual Del Usuario página 25

1. Hold the car vacuum cleaner by the handle(4). Make sure you cannot accidentally switch on the
appliance.
2. Slide the nozzle with rubber attachment (7) or the crevice tool (6) into the nozzle of the car vacuum
cleaner.
3. If so required, slide the nozzle with brush (8) onto the crevice tool (6).
cleaninG anD maintenance - cleaning the exterior
Clean the outer surface of all parts with a damp cloth and a cleaner that is suitable for plastics. Make sure
no moisture gets into the car vacuum cleaner.
ATTENTION:
• Never immerse the appliance, the cord or the plug in water.
• N ever use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
cleaninG anD maintenance - removing dust
Remove the dust from the compartment at periodic intervals.
1. Press the release button (1) on the upper side of the appliance, and remove the compartment from the
motor housing.
2. Remove the filter holder (11) from the compartment.
3. Clean the filter, if necessary (see 'Cleaning the filter').
4. Dispose of the dust in a dustbin.
5. Return the filter holder to the compartment.
6. Fit the compartment to the motor housing.
cleaninG anD maintenance - removing liquid
1. Press the release button (1) on the upper side of the appliance, and remove the compartment from the
motor housing.
2. Remove the filter holder (11) from the compartment.
3. Clean the filter, if necessary (see 'Cleaning the filter').
4. Empty the liquid in a washbasin.
5. Clean the interior of the compartment and the filter holder with water and a cleaner that is suitable for
plastic and dry thoroughly.
6. Return the filter holder to the compartment.
7. Fit the compartment to the motor housing.
ATTENTION:
• You must always empty any liquid in the compartment before storing the car vacuum cleaner.
• Do not hold the compartment vertically upright, to prevent liquid from leaking from the compartment.
cleaninG anD maintenance - cleaning the filter
You will need to clean the filter when it is severely fouled. Failure to do so can result in reduced suction,
and may even cause damage to the motor.
1. Remove filter (11) from the compartment (10).
2. Rinse the filter in lukewarm water.
3. Allow the filter to dry thoroughly.
5. Return the filter holder to the compartment.
6. Fit the compartment to the motor housing.
ATTENTION:
• Do not clean the filter in a dishwasher.
• Do not use appliances such as a hairdryer to dry the filter.
25
EN