Stroller Assembly; Open Stroller; Adjust Calf Support; Assemble & Detach Rear Wheels - Joie crosster stroller Manual De Instrucciones

Stroller Assembly

Please read all the instructions in this manual before assembling and using this product.

Open Stroller

see images -
1 5
!
Check that the stroller is completely open before continuing.

Adjust Calf Support

see images
5
The calf support has 2 positions.
Raise Calf Support
To raise the calf support, just lift it upwards.
Lower Calf Support
Press the adjust buttons on both sides of the calf support
Assemble & Detach Rear Wheels
see images -
6 8
Assemble & Detach Armbar
see images -
9 11
Assemble & Detach Hood
see images -
12 19
The completely assembled stroller is shown as
20

Stroller Operation

Adjust Handle

see images -
21 22
Handle can be adjusted to 6 positions.

Use Hood

see images -
23 25
!
Total maximum weight of hood storage pocket must not exceed 0.5kg.

Use Buckle

see images -
26 27
Release Buckle
Press the center button to release the buckle. 26
19
- 1 5
5 , and rotate the calf support downwards.
Lock Buckle
Match the waist belt buckle with the shoulder buckle
A "click" sound means the buckle is locked completely.
!
To avoid serious injury from falling or sliding out, always secure your child with harness.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand lay flat on child's chest.
!
Do not cross the shoulder belts. This will cause pressure on child's neck.
Use Shoulder & Waist Harnesses
see images -
28 31
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
28
Shoulder harness anchor A
- 2
28
Shoulder harness anchor B
- 2
- 3
28 Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.
Thread it through the shoulder harness slot from back to front.
30
child's shoulder height.
Use slide adjuster to change the harness length.
- 2
31
Press the button , while pulling the waist harness to proper length.

Adjust Backrest

see images -
32 33

Use Brake

see images -
34 35
Tip
Always apply brake when stroller is in stopped position.
Tip
Hand brake is not intended as a parking brake.

Adjustable Rear Wheel Suspension

see images -
36 37
The suspension is soft as
The suspension is hard as
!
Please ensure there is no weight placed on the stroller when you are adjusting the rear suspension.

Use Front Swivel Lock

see images
38
Tip It is recommended to use swivel locks on uneven surfaces.
27 - 1
, and click into the center buckle.
27 - 3
29 Rethread it through the slot that is closest to
31 - 1
31
36
37
27 - 2
- 3
20