Fold Stroller; Detach Soft Goods; Use Accessories; Cleaning And Maintenance - Joie crosster stroller Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21

Fold Stroller

see images
-
39
41
!
Please fold the hood before folding the stroller.

Detach Soft Goods

see images
-
42
56
1. Follow steps
-
to detach soft goods.
42
56
2. To re-attach the soft goods please repeat the above steps in the reverse step.

Use Accessories

Accessories may be sold separately or may not be available depending on region.
Use Mosquito Net
see images
57
Use Shoulder Harness Pad Cover and Crotch Harness Pad Cover
see images
58
The shoulder harness pad cover or crotch harness pad cover
reverse these steps to re-assemble shoulder harness and crotch harness pad cover.
Use Footmuff
see images
-
59
60
The soft footmuff can provide your child with a warm and comfortable environment.
Assemble the footmuff by following these steps.
1. Before assembling the footmuff, Please release the buckle and remove the shoulder cover.
2. Place the footmuff over the seat after unziping it, thread the shoulder harnesses, waist harnesses and crotch
59
harness through respective slots.
3. Assemble the shoulder cover to the unit.
4. Stick the hook and loop fasteners.
5. Place baby into the footmuff, lock the safety buckle, and then rezip the footmuff. The assembled footmuff is
shown as
60
!
For the using method for restraint system, please refer to the relevant section in the instruction manual.
Use Rain Cover
see images
61
To assemble the rain cover, place it over the stroller, and then attach it on the handle by hook and loop
fasteners.
61
!
When using the rain cover, please always check its ventilation.
!
When not in use, please check that the rain cover has been cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain cover during hot weather.
21
can be removed from the webbing. Simply
58
Use with Joie Infant Child Restraint
see images
-
62
67
When using with Joie infant child restraint Gemm & i-Gemm, please refer to the following instructions.
!
Adjust the backrest to the lowest position.
1. To attach adapter, place adapter onto mounts as show
completely.
63
2. To attach infant child restraint, place infant child restraint onto adapter as show
the child restraint is locked completely.
65
3. To remove infant child restraint, lift the infant child restraint upwards
66
- 1
release buttons.
!
If you have any problems about using the stroller and the adapter, please refer to their own instruction manuals.
!
Please don't fold stroller when attaching the infant child restraint.
Use Carry Cot
see images
-
68
73
When using with Joie carry cot ramble, please refer to the following instructions.
!
Adjust the backrest to the lowest position.
!
If you have any problems about using the stroller and the carry cot, please refer to their own instruction
manuals.
!
Please don't fold stroller when attaching the carry cot.

Cleaning and Maintenance

!
Removable seat pad may be washed in cold water and drip-dried. No bleach. Please refer to the care label
for instructions on cleaning the fabric parts of the stroller.
!
To clean stroller frame, use only household soap and warm water. No bleach or detergent. Periodically wipe
clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the
stroller has come into contact with water.
!
From time to time, check your stroller for loose screws, worn parts,torn material or stitching. Replace or
repair the parts as needed.
!
Excessive exposure to sun or heat could cause fading or warping of parts.
!
If stroller becomes wet, open hood and allow to dry thoroughly before storing.
!
If wheels squeak, use a light oil (e.g., Silicon Spray, antirust oil, or sewing machine oil). It is important to get
the oil into the axle and wheel assembly.
74
!
When using your stroller at the beach, completely clean your stroller after use to remove sand and salt from
mechanisms and wheel assemblies.
, A "click" sound means the adapter is locked
62
64
, A "click" sound means
- 2
66
while pressing the two stroller fix
22

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido