Use Shoulder & Waist Harnesses
see images
-
39
42
!
In order to protect your child from falling out, after your child
is placed into the seat, check whether the shoulder and
waist harnesses are at proper height and length.
- 1
Shoulder harness anchor A
39
- 2
Shoulder harness anchor B
39
- 3
Slide adjuster
39
For larger child, use shoulder harness anchor A and the high-
est shoulder slots.
For smaller child, use shoulder harness anchor B and the low-
est shoulder slots.
To adjust the position of the shoulder harness anchor, turn
the anchor to be level with the side facing forward. Thread
it through the shoulder harness slot from back to front.
Rethread it through the slot that is closest to child's shoulder
height.
41
Use slide adjuster to change the harness length.
Press the button
-
2, while pulling the waist harness to
42
proper length
- 3
42
19
Use Front Swivel Lock
see images
Pull up the front swivel locks to maintain the moving direction.
43
Tip
Use Brake
see images
To lock wheels, step the brake lever downwards.
To release wheels, just lift the brake lever upwards.
Tip
40
Fold Stroller
see images
-1
42
!
!
Push secondary lock
47
stroller can stand when folded.
43
It is recommended to use swivel locks on uneven
surfaces.
-
44
45
Always set the parking brake when stroller is not
moving.
-
46
49
Please fold the hood before folding the stroller.
Please do not lock swivel while folding to avoid folded
stroller unable to stand.
-1
and squeeze one-hand-fold handle
47
-2. Pull the armrest rearwards to fold stroller, then the
44
45
46
49
20