Alcad 915 Serie Manual Del Usuario página 74

First we must configure the network of our PC/MAC within the same range that we receive the SS modules con-
figured in the factory (192.168.10.100).
We will enter the address: 192.168.10.254.
All SS modules leave the factory with the same IP address: 192.168.10.100. This is why, to avoid conflicts with
other IP addresses, we must initially configure the IP address for each module in local mode. Subsequently, we
will access the DVB-S/S2 IP (915-SS) headend via the local area network (LAN) in order to configure the mo-
dules one by one.
Use an RJ-45 cable to connect the PC/MAC locally to the headend module to be programmed.
72 - ALCAD IPTV web configurator manual
1
2
SS-201 SS-201 SS-201 SS-201 SS-201 SS-201
SS-201
SS-201 SS-201
ENG