Alcad 915 Serie Manual Del Usuario página 76

Once the correct key and password have been entered, we have access to all the menus for the configuration
of the module. The first step will be to assign to the SS module the IP address we want it to work with on the
network. In this example, we shall configure the equipment on the network 192.168.23.XXX, and we will as-
sign a correlative IP address to each module, from 2 to 10 (since our example is for a headend with 9 modu-
les).
To do this, we go to the Network menu and configure the SS module as follows:
Configuration Type: Static IP
IP address: 192.168.23.2
Subnet mask: 255.255.255.0
Default Gateway: 192.168.23.1
To apply this configuration, click on the Set IP button.
When you do this, a confirmation box will pop up.
We must bear in mind that when we confirm this step, the navigator will suddenly stop displaying this screen,
since we are navigating with the default IP address (192.168.10.100). By confirming, we change the IP ad-
dress of the module, so that there is no longer any communication between the browser and the module.
74 - ALCAD IPTV web configurator manual
4
ENG