Alcad 915 Serie Manual Del Usuario página 80

7
Once the input signal has been configured and tuned, we will move on to configure the TV/radio services that
we want to broadcast over the network. To do this, we go to the Output Streams menu. Within this menu, we
select each service that we want to broadcast by clicking in the box located to the left of the name of the ser-
vice. The maximum number of services that can be broadcast is 8, whether TV (FTA: free to air, i.e. free chan-
nels; or CA: conditional access with subscriber card) or radio.
When the desired services have been selected, click on the Apply button. In the Selected column we can see
at a glance which services have been selected.
If we wish to choose which PIDs are to be broadcast in each service, we must open the PIDs Selection menu,
by clicking on the Select PIDs button. (If we do not open this advanced menu, by default all the PIDs will be
selected.)
78 - ALCAD IPTV web configurator manual
ENG