Storing Data To A Disc; Storing Computer Data (Data Storage) - Sony DS-HMD1 Manual De Instrucciones

Storing data to a disc

Storing computer data (Data Storage)

When you insert a disc in Hi-MD mode into the drive and connect it to a
computer, it will appear in Windows Explorer as an external data storage
drive, allowing you to copy data from the computer to a disc. If the disc
contains material recorded in MD mode, the drive will not be recognized
as an external data storage device.
If you insert a blank 60/74/80-minute disc, the disc will be automatically
used in Hi-MD mode.
1
Insert a disc.
1 Slide the OPEN switch to
open the lid.
2
Connect the drive to the computer.
Use the supplied USB cable to connect the drive to the computer.
When the drive connects correctly with the computer, the
ACCESS lamp will light up (this may take about 15 seconds).
Power (bus power) is supplied to the drive from the USB port of
the computer.
To the USB port
2 Insert a disc with the label side
facing up, and press the lid down
to close.
OPEN
switch
Make sure the
record-protect tab
is closed.
USB cable (supplied)
To the USB cable
connecting jack
continued
13
-GB