Saivod MH-02 Manual De Instrucciones página 18

Assembly
1.Feet assembly(for portable heater)
Press the feet provided firmly onto the radiator as in figure,
see figures below
2.Wall-mounting fitting (used as fixed appliance)
Fitting accessories should be mounted on the wall by
screws provided. They should be a distance of 600-650
mm away from the floor. It is important to mount the
radiator horizontally.
Wall mounting assembly method: see following figures
(1)Fixing the pothooks on the backside of Mica heater
for right place.(see picture 3)
(2)Drill holes on the wall according to size on the
picture.(see picture 4)
(3)Above two pothooks hang in the screws which on the
wall .Middle two pothooks have support function only.
The down pothook fix on the wall directly.(see picture 5,
6)