Saivod MH-02 Manual De Instrucciones página 20

Functions
•Operating Instructions
Plug the heater into an electric outlet and press the power switch , it is at
STANDBY mode and the display will show the current room temperature.
Press the power mode button "MODE" and the modes will cycle as below
LO → HI → LO with temp setting → HI with temp setting
STANDBY
LO
HI
LO with temp setting
temperature setting
HI with temp setting
temperature setting
•Desired temperature settings
At the mode of "LO with temp setting" / "HI with temp setting"
The default desired temperature "21˚C" will be displayed. Adjust the desired
temperature (15˚C-27˚C) by the "+ －" buttons, and then the heater will maintain
the set temperature.
•Timer Function
•TIMER OFF
At mode of "LO" / "HI" / "LO with temp setting" / "HI with temp
setting"
Press the button "TIMER OFF" to activate the TIMER OFF function, adjust
the number of hours (1-24 hours) of the countdown timer by the "+ －"
buttons. The heater will be automatically switched to "STANDBY" mode
after the preset time has elapsed.
To deactivate the TIMER OFF function, press the button "TIMER OFF"
again.
•At "STANDBY" mode
Press the button "TIMER ON" to activate the TIMER ON function, adjust
the number of hours (1-24 hours) of the countdown timer by the "+ －"
buttons. The heater will be automatically switched to "HI" mode after the
preset time has elapsed.
To deactivate the TIMER ON function, press the button "TIMER ON" again.
•Remote Control
The unit comes with a remote control which operates exactly the same as
the manual operation panel on the heater.
STANDBY
― Standby mode
― Low heat mode
― High heat mode
― Low heat mode with desired
― High heat mode with desired