Teaching-In To The Access Point (Alternative) - HomeMatic IP Easy Connect Instrucciones De Montaje

Teaching-in
If no pairing operations are carried out, pairing mode is
exited automatically after 3 seconds.
If you want to add another device to the existing devices,
first activate the pairing mode of the existing device and af-
terwards the of the new device.
If, for example, you want to add another radiator thermo-
stat, first pair the new radiator thermostat to the existing
radiator thermostat. Afterwards, you can pair the new radia-
tor thermostat with the existing window / door contact.
If you are using several devices in one room, you should pair
all devices with each other.
4.2

Teaching-in to the Access Point (alternative)

You can connect the devices either to the Homematic IP
Access Point or the Central Control Unit CCU2/CCU3. For
detailed information, please refer to the Homematic IP User
Guide, available for download in the download area of
www.eQ-3.com.
If you have already taught in the devices directly and now
want to teach in the Access Point, you first need to restore
the devices' factory settings (see „10 Restore factory set-
tings" on page 57).
To integrate the device into your system and to enable control
via the Homematic IP app, you must teach-in the device to your
40