Installation; Installation Of The Radiator Thermostat - HomeMatic IP Easy Connect Instrucciones De Montaje

Homematic IP Access Point first.
• Open the Homematic IP app on your smartphone.
• Select the menu item "Teach-in device".
Remove the insulation strip from the battery compartment (B or
•
M) of the device. Teach-in mode remains activated for 3 minutes
You can manually start the teach-in mode for another 3 min-
utes by pressing the system button briefly (D or L) .
• Your device will automatically appear in the app.
• To confirm, please enter the last four digits of the device number
(SGTIN) in your app or scan the QR code. Therefore, please see
the sticker supplied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up green. The device
is now ready for use. If the LED lights up red, please try again.
• Please select, in which application (e.g. climate control) you
would like to use the device.
• In the app, give the device a name and allocate it to a room.
5

Installation

5.1

Installation of the radiator thermostat

The radiator thermostat can be installed without draining heating
water or intervening in the heating system. No special tools are re-
quired, nor does the heating have to be switched off.
The union nut (A) attached to the radiator thermostat can be used
universally and without accessories for all valves with a thread size
of M30 x 1.5 from the most popular manufacturers such as Heimeier,
Installation
41