Setting An Alarm - Topcom BUTLER OUTDOOR 2010 TWIN Manual De Usuario

Ocultar thumbs Ver también para BUTLER OUTDOOR 2010 TWIN:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Time and alarm functions
repeatedly, select 'SET DATE&TIME'.
4. Press
or
4
15
5. Press
to confirm.
17
6. Enter the day and month as two digits each and press
.
17
The date and time will not be lost in the event of a base
station power failure.
5.2
Selecting the date/time format
1. Press
.
17
2. Press
or
repeatedly, select 'CLOCK & ALARM'.
4
15
3. Press
to confirm.
17
4. Press
or
repeatedly, select 'SET FORMAT'.
4
15
5. Press
to confirm.
17
repeatedly, select 'TIME FORMAT' or
6. Press
or
4
15
'DATE FORMAT'.
7. Press
to confirm.
17
8. Select the time format (12-hour or 24-hour clock) and press
17
or
Select the date format (DD/MM or MM/DD) and press
5.3
Auto clock adjust
When this function is turned on the date and time will be updated
by the callerID data received. This can be turned off as followed:
1. Press
.
17
2. Press
or
repeatedly, select 'CLOCK & ALARM'.
4
15
3. Press
to confirm.
17
4. Press
or
repeatedly, select 'AUTO CLOCK ADJ'.
4
15
5. Press
to confirm.
17
6. Select 'ON' or 'OFF' and press
20
.
17
to confirm.
17
5.4
The alarm function
Set the date and time before using this function so that
the alarm sounds at the correct time.
You can set various alarms for handsets registered on the base
station. The alarm only sounds on the handset and not on the base
station or any other handset.
If an alarm is set, the alarm symbol
standby mode.
When the alarm time is reached the handset will ring for 1 minute.
To stop the alarm tone, press any key on the handset.

5.4.1 Setting an alarm

1. Press
.
17
2. Press
or
repeatedly, select 'CLOCK & ALARM'.
4
15
3. Press
to confirm.
17
4. Press
or
repeatedly, select 'ALARM'.
4
15
5. Press
to confirm.
17
6. Press
or
multiple times and select one of the 3
4
15
possible settings: 'ONCE', 'DAILY', or 'OFF'. Confirm by
pressing
. If you select 'ONCE' or 'DAILY', the
17
following appears in the display:
7. Enter the alarm time as four digits and press
confirm your input.
8. To deactivate the alarm function, select 'OFF' and confirm with
.
17
5.4.2 Setting the alarm tone
1. Press
.
17
2. Press
or
repeatedly, select 'CLOCK & ALARM'.
4
15
3. Press
to confirm.
17
Butler Outdoor 2010 - Twin - Triple
appears in the display in
SET TIME
07:00
to
17

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Butler outdoor 2010 triple

Tabla de contenido