Topcom BUTLER OUTDOOR 2010 TWIN Manual De Usuario página 8

Installation
This does not mean that normal DECT radiation is harmful to
health. Rather, low-radiation operation avoids any unnecessary
radiation exposure.
Set up the base station in a location where you do not spend much
time, for example in the hallway. Avoid setting it up in your or your
children's bedrooms or the lounge.
2 Installation
Make sure the batteries are charged before using your
telephone for the first time, otherwise the device will not
operate optimally.
Take account of the safety notes about the environment
and circumstances of the installation and location! Do not
commission the device in an environment with a risk of
explosions!
2.1 Commissioning the base station
Perform the following steps:
• Plug the mains adapter into a 230 V socket. Plug the
connector into the adapter jack on the bottom of the base
station.
• Connect the telephone jack on the bottom of the base station
to the telephone socket using the supplied telephone cable.
8
3
4
1. Telephone wall socket
2. Telephone cable
3. Bottom of the base station
4. Mains adapter cable
Butler Outdoor 2010 - Twin - Triple
2
1