DeWalt DW7187 Manual De Instrucciones página 4

4. Attach the LPS with the two
screws removed in Step 1.
INSTALLATION OF LASER
1. Remove the four screws (A). Save the screws to assemble
the laser in Step 4. Retain the cover for future use if laser is
removed. Rotate the guard to provide access to screws.
A
2. Attach the connection
from lead wire to the
laser.
3. Tuck the wire connection into
the area in the laser as
shown. Attach the laser to the
saw.
4. Attach the laser with the screws removed in Step 1.
3