Shelves And Bins - GE GBC12IAX Manual Del Propietario E Instalación

About the shelves and bins.
Rearranging the Shelves
To remove: Lift up on the front
of the shelf and pull the shelf past
the stop location.
To replace: Tilt the shelf up while
engaging it in the molded supports
on the sides of the refrigerator cavity.
Push the shelf past the stop position.
NOTE: The shelves will not fit in
the third position.
Door Bins
To remove: Lift the bin straight up,
then pull out.
To replace: Engage the bin
in the molded supports on the door
and push down. It will lock in place.
Storage Bins
To remove: Slide the pan out to the
stop position, lift the pan up and past
the stop position, and lift the pan out.
To replace: Insert the rear of the pan
over the stop and slide the pan back
into position.
GEAppliances.com
Third
position
5