Toto YB990 Manual De Instrucciones página 6

YP990 Paper Holder
1. Hold the body against the wall and
mark drill points. Open 1/4" (6mm) in
diameter, over 1-1/2" (40mm) deep
holes for the wall anchor.
2. Drill the wall holes for the provided
wall anchors. Hold the front long
driver to mount the body on the wall
with flat head wall screws to fix the
body. Avoid scarring the body with
the tools.
3. Install the cover from below the body.
Secure the cover with the provided
hex wrench and cover screws.
INSTALLATION PROCEDURE
6
Wall Screw Position
2" 4"
(50mm) (100mm)
Wall
Anchor
Flat Head
Wall Screws
Front
Cover Screw
2"
(50mm)
Wall Hole
Body
Cover